CSM RE2521-BLN 300 GPD TW-LE Commercial Membrane

$159.99 $139.99


Add to Wishlist
Add to Wishlist
SKU: RE2521-BLN Categories: ,


The CSM RE2521-BLN 300 GPD TW-LE Commercial Membrane combines quality and functionality with durability for a lifetime of customer satisfaction. With its long filter life, it makes a valuable addition to the water filter system. It removes impurities from water to make it safe to drink.

Compared to other desalination processes, the use of CSM RO Membranes shows marked improvements in performance, cost-efficiency, and more convenient maintenance. However, because energy costs required for the operation of the RO system takes up a large portion of the whole maintenance fee, continued efforts are being made to relieve this burden.

One solution is CSM’s Low-Pressure RO Membranes, which yields same performance rates as other regular RO membranes but requiring only two-thirds of the pressure. Therefore, RO systems installed with these membrane elements require far less in energy and relevant costs (such as part costs because the system can be simplified). Main applications are for treating brackish water.


  • Elements contained in the boxes must be kept dry at room temperature (7-32°C; 40-95°F) and should not be stored in direct sunlight. If the polyethylene bag is damaged, a new preservative solution (sodium bisulfite) must be added and air-tight sealed to prevent drying and biological growth
  • Permeate from the first hour of operation should be discarded to flush out the preservative solution
  • Elements should be immersed in a preservative solution during storage, shipping, and system shutdowns to prevent biological growth and freezing. The standard storage solution contains 1% of weight sodium bisulfite or sodium metabisulfite (food grade). For short-term storage (i.e. one week or less) 1% by weight sodium metabisulfite solution is adequate for preventing biological growth
  • Keep elements moist at all times after initial wetting
  • Avoid excessive pressure and flow spikes
  • Only use chemicals compatible with the membrane elements and components. Use of such chemicals
  • void the element limited warranty
  • Permeate pressure must always be equal or less than feed/concentrate pressure. Damage caused by permeating back pressure voids the element limited warranty


  • Permeate flow rate: 300 GPD (1.1 m3/day)
  • Stabilized salt rejection: 99.2%
  • Effective membrane area: 12 ft2 (1.1 m2)
  • 1,500 mg/L NaCl solution at 150 psig (1.0 MPa) applied pressure,15% recovery,77 oF (25 oC),pH 6.5-7.0
  • Membrane type: Thin-Film Composite
  • Membrane material: Polyamide (PA)
  • Element configuration: Spiral-Wound, FRP Wrapping
  • Dimensions: Diameter x Length (inch): 2.5 x 21

Operating Limits:

  • Max. Pressure Drop / Element: 15 psi (0.1 MPa)
  • Max. Pressure Drop / 240″ Vessel: 60 psi (0.41 Mpa)
  • Max. Operating Pressure: 600 psi (4.14 MPa)
  • Max. Feed Flow Rate: 6 gpm (1.36 m3/hr)
  • Min. Concentrate Flow Rate: 1 gpm (0.23 m3/hr)
  • Max. Operating Temperature: 113 oF (45 oC)
  • Operating pH Range: 3.0-10.0
  • CIP pH Range: 2.0-11.0
  • Max. Turbidity: 1.0 NTU
  • Max. SDI: (15 min) 5.0
  • Max. Chlorine Concentration: < 0.1 mg/L

Design Guidelines for Various Water Sources:

  • Wastewater Conventional (SDI < 5): 8-12 gfd
  • Wastewater Pretreated with UF/MF (SDI < 3): 10-14 gfd
  • Seawater, Open Intake (SDI < 5): 7-10 gfd
  • Seawater, Beach Well (SDI < 3): 8-12 gfd
  • Surface Water (SDI < 5): 12-16 gfd
  • Surface Water (SDI < 3): 13-17 gfd
  • Well water (SDI < 3): 13-17 gfd
  • RO permeate (SDI < 1): 21-30 gfd

Saturation Limits (Using Antiscalants)†:

  • Langelier Saturation Index (LSI): <+1.5
  • Stiff and Davis Saturation Index (SDSI): <+0.5
  • CaSO4: 230% saturation
  • SrSO4: 800% saturation
  • BaSO4: 6,000% saturation
  • SiO2: 100% saturation
    †The above saturation limits are typically accepted by proprietary antiscalant manufacturers. It is the user’s responsibility to ensure proper chemical(s) and concentration are dosed ahead of the membrane system to prevent scale formation anywhere within the membrane system. Membrane elements fouled or damaged due to scale formation are not covered by the limited warranty.


There are no reviews yet.

Be the first to review “CSM RE2521-BLN 300 GPD TW-LE Commercial Membrane”

Your email address will not be published. Required fields are marked *

You may also like…

Close Menu